REPRODUCING REAL MUSIC

PHASS PRODUCTS

RE 2.2 / 2ch amplifier

RE 2.2 is one of our top grade model in the RE amplifiers. It has been constructed by our originally developed transformers and audio grade electric parts without any compromise. It achieves a great ability that can fully control speakers and it realize an exceptional reproduction of nature sound music.

Output power: 2x40W / Input sensitivity : 0.25V / Input impedance : 10Kohm / Load impedance : 4-16 ohm / Consumption current : Idle time (no signal) – 3A, Remote off time : 2mA / Size (mm) :320(W)x92(H)x504(D)

MD 0790 6.5″ mid bass (ALnico)

This 6.5″ mid bass consists of a well considered synthetic resin basket, a light weight rigid paper cone and a proper sized Alnico magnet. It can realize quite flat and wide band frequency response effectively. MD0790 achieves real and organic sounds without any distortion. Its entire range from bass to treble sound dissipate fresh, smooth, coherent and articulate sound naturally. It can accomplish its real ability in the proper combination with the same grade tweeter.

Music power : 120W / Sensitivity : 91dB / Frequency response : 60-7,000Hz / Outer dimension, Diameter : 166mm / Fixing hole diameter : 140.4mm / Installing depth : 65mm / Impedance : 6 ohm

MD 0875 8″ mid bass (ferrite)

This 8″ mid bass adopts a light weight rigid paper cone with a specialize corrugated fabric surround and a proper sized ferrite magnet in steel basket. It can realize quite flat and wide band frequency response effectively. It achieve real and organic sound without any distortion. Its entire range from bass to treble performs fresh, smooth and articulate sounds naturally. It can show its real ability in the best balanced combination with the same grade tweeter.

Music power: 100W / Sensitivity: 95dB / Frequency response: 50-6,000Hz / Outer dimensions, Diameter: 206mm / Fixing hole diameter: 189mm / Installing depth: 70mm / impedance: 6ohm

PT 25 Puremag Tweeter

PT 25 is our highest range tweeter. Its magnetic circuit consists of the special pure metal and Alnico 5 magnet drives a 25 mm fabric diaphragm. This magnetic circuit really features non distorted and pure tasty sound, and which can explode the other tweeters truly.

Frequency response : 700-30,000Hz / Outer dimension, Diameter : 59mm / Installing depth : 42mm / Impedance : 6 ohm

AT 25ex fabric diaphragm Alnico tweeter

New AT 25ex is the alternative model of previous AT 25 which was developed as the compact hi-end tweeter with keeping the reproduction ability AT58 can realize. It uses a natural fabric diaphragm and inner type long length Alnico magnet and it achieved the expansion of installation ways in the car. AT 25ex can perform transcendent beautiful sound witount any distortion and unfavorable taste.

Frequency response : 700-30,000Hz / Outer dimension, Diameter : 59mm / Installing depth : 42mm / Impedance : 6 ohm

Signal Hi to low Convertor

HLC-01 is a high end hi-low signal convertor, which achieve optimal signal transmission by converting the speaker output signal from a head unit or another power amplifier into pure RCA signal, and then transmit it to the RCA input of the power amplifier (-10dB) without any distortion or other disturbance.

If the head unit is equipped with a BTL constituted power amplifier, the RCA signal converted by the HLC-01 will be transmitted as a balance line signal to the power amplifier.

Input level (Max): 20 dB (25W/4ohm)
Output level: 0 dB
Size (WXLXH mm): 121.1X79.6X37.5

AP 4.50 / 4 channel power amplifier

New AP 4.50 is the standard amplifier which has good reproduction ability as the Single Ended Push Pull circuit layout one which is used in ordinary entry level amplifiers in the world. And it realized the high power handling and standard sound beyond the imagining. It is the real cost efficiency small amplifier.

Power output : 4 x 50W(0.1%THD) / Music power : 4 x 75W (4 ohm), 4 x 120 W (2 ohm) / Power supply: 11 – 15VDC / Input sensitivity : 0.2-4V / Input impedance : 22 K ohm / Frequency response / 2 Hz- 36KHz (-3 dB) / S/N ratio : 90 dB / Distortion THD: < 0.05% / Idling current :0.4A / Remote Voltage : 10-17V / / Fuse : 25 A x 2 / Load impedance: 2- 4 ohms / Dimension : WxLxH mm 140 x 273 x 53

SIMONTE AUDIO PRODUCTS

 Refining Audio Transformation

SIMONTE’s RESONANCE TUNE CREATES

\

car accoustic vibration refinement

\

Clean and clear sound

\

Improves depth and imaging

\

car engine performance

\

Improves engine power and efficiency

\

Increase horsepower

\

Increase torque

SIMONTE RESONANCE TUNE

The Resonance Tune is a dual-usage resonance control device developed by our sister company Simonte. It can be used for both acoustic control and engine refinement duties. Ultimately assisting in improved performance.
For acoustic control, the Simonte Resonance Tune helps clean staging, create more definition, improve energy and control low frequency standing waves. Placed in different locations within the listening space – either singularly or in modular blocks – its use has been shown to improve listening pleasure.
For car engine refinement, the Resonance Tune improves it’s performance by optimising more efficient electron flow and minimising energy loss. Resulting in a better driving performance.

Sound is generated by the rarefaction and compression of air caused from a physical medium. The quality of sound produced from these mediums depend on the density of the materials they are made of. The Simonte Resonance Tune was designed with appropriate materials that help sharpen staging, provide more definition, improve energy, and control low frequency standing waves. Resulting in a cleaner and clearer sound.

Dyno test for proof (1)

BMW 3 series F 30 – Dyno test BEFORE Simonte resonance tune.

 

Dyno test for proof (2)

BMW 3 series F 30 – Dyno test BEFORE Simonte resonance tune.

Dyno test for proof (1)

BMW 3 series F30 – Dynamometer has shown performance increases AFTER 2pcs Simonte resonance tune were placed on ECU

 

Dyno test for proof (2)

BMW 3 series F30 – Dynamometer has shown performance increases AFTER 2 pcs Simonte resonance tune were placed on battery.

 

SIMONTE’s CHAMBER REFINER

\

Create depth and width to the sound stage

\

Focus

\

Details

\

Smoothness

\

Improves tonality

SIMONTE’s CHAMBER REFINER

Air-borne and floor borne vibrations are two of the hardest problems to eliminate in a small environment. They produce a very hollow, shallow and non-responsive system. The Simonte Chamber Refiner was designed to control the unwanted vibration. Thus increases the dynamic range and better low frequency control.

SIMONTE’s PREMIUM CABLES

\

simonte power cord

\

Accurate Power Delivery

\

simonte speaker cable

\

Accurate and Emotive Performance

\

simonte Interconnect

\

Organic and Atmospheric

SIMONTE’s PREMIUM CABLES

Customised and hand braided to compliment specific audio requirements.

FOR AUDIOPHILES…The Simonte Audio Cables are paramout in natural audio reproduction.

Electrical transmission through cables are one of the most problematic issues causing significant quality loss in a sound system. The Simonte Audio Cables were designed and handcrafted with passion to maximize and stabilize transmission, whilst eliminating electronic interferences. Resulting in a cleaner and more controlled signal flow.

BOOK AN APPOINTMENT

appointment footer

CONTACT US

TEHNICHI AUDIO SDN BHD

No. 31 & 33 Ground Floor, The PJ Highway Centre, Jln 51/205, 46050,
Petaling Jaya, Selangor,
Malaysia.

 +6 (0)3-77839662

 012-391 2662 | 012-297 8226

  tehnichiaudio@googlemail.com